On Nikon & Other Photo Gear

Everything Nikon and whatever…

iPhone Support with Quick Release Plate

It has been a while since my last post.

These days I tend to carry my iPhone around when taking pictures, it’s a very useful thing really. There are a number of interesting apps, many of them free and quite useful for long exposure photography, sooo…instead of fumbling through pockets each time I need it I looked around for some sort of plate/support that could hold it within easy reach of the camera. I did not find anything commercially available that meets my requirements [one came close though] so I decided to make one from bits and pieces of stuff lying around.

Voilà, jorgesantosphotography proudly presents the ‘iPhone Support with Quick Release Plate’…tattaaaa…

iPhone support with quick release plate

DIY iPhone support with quick release plate

The half-plate comes from a camera plate I don’t use anymore. I cut it in half to reduce weight. The small ballhead comes from a Manfrotto 709B table top tripod and the iPhone case is from Griffin. Of course, you case use a cheaper ballhead and iPhone case. I just had this stuff lying around so…here is how it looks when attached to the camera, as I intended it to be:

Attached to the camera L-plate

Attached to the camera L-plate

Yes, you need a sliding clamp such as the RRS B2-Duo or a Novoflex Q=Mount [better choices then the expensive and bulky FAS Clamp shown]. The small Manfrotto ballhead allows you to position the iPhone as you want [portrait/landscape, whatever] and has enough clamping power to hold it in place even if you are running around with the camera with the iPhone attached. I have been using it for some time and I still have a working iPhone…You can take it apart for packing too, here:

Taken apart

Taken apart

A couple of things, don’t use an iPhone plastic case that has a rubber coating! since the round camera base is glued to the back of the iPhone case with Epoxy it will separate from the case quite easily because it is actually glued to the rubber coating. Also, use some coarse sandpaper on both surfaces [case and round camera base that comes with the ballhead] before applying a thin layer of strong Epoxy. Optionally, you can also put a screw through the cut-off Arca Swiss plate preventing the base of the ballhead from rotating in relation to the plate [red circle]. Put a drop of thread locker glue [Loctite blue for e.g.] in all the threads just in case [like the back of the case to the ballhead if you want, it packs quite nicely even when not taken apart].

Hope you find this DIY project useful in some way, I did at times.

Advertisements

15/10/2011 - Posted by | Photo Equipment Reviews, Tips | , , , , ,

2 Comments »

  1. Great job! What are you using he iPhone for while attached to you camera?

    Comment by John Schroeder | 22/03/2012 | Reply

    • Hi John, Thanks. Most often I use it for long exposure calculations [nd timer app] with a 10stop filter, moon finder app and Theodolite Pro since it can capture an image [for later reference] with the direction and other stuff in addition to the GPS coordinates. Also use the iPhone with an additional battery for GPS navigation with MotionX GPS. Best, Jorge Santos

      Comment by Jorge Santos | 22/03/2012 | Reply


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: